PLC Control Automatic Solder Paste Thawing Machine With Independent
Time Control
Solder Paste Rewarming Machine:
The solder paste needs to be tempered before use. Usually the
tempering time is about 4 hours. The purpose is to restore the
activity of the refrigerated solder paste and make it easier to
use. Our solder paste rewarming machine is an intelligent
management device that integrates the functions of refrigerated
storage, rewarming, stirring, traceability and direction
traceability of solder paste. The refrigeration temperature can be
controlled within the range of 1-10 degrees Celsius, and the
temperature can be controlled through numbers and temperature.
Curve monitoring and recording, first in, first out, to meet the
storage and use requirements of different solder pastes.
Specification:
| Machine name | Fully automatic solder paste reheating machine | product brand |
| Operating mode | voltage mode | Product net weight: 16kg |
| Operating Voltage | AC220V 60HZ | Product material: steel plate spray paint |
| Product Size | Four slots L670*W220*H335mm Tank size: length 150*depth 100*height 110mm |
| Ability to work | The solder paste and red glue reheating machine/defrosting machine
can be used with solder paste in the slot and needle-type red glue
(all small red glue with a total length of less than 120MM can be
used), and the solder paste and red glue can be switched
intelligently. New and old customers can choose from
4/5/6/8/10/12/14 workstations to 30 workstations. Non-standard can
be customized. Supports 250G/500G solder paste, total length less
than 120MM needle tube red glue. |
Features
1. Using PLC control, imported electrical components are assembled
and produced.
2. Each can of solder paste placement slot has independent time
control. After setting the time, the solder paste can will be
automatically fixed by the cylinder, and the solder paste will
automatically release the can after the solder paste has returned
to temperature.
3. Solder paste cans of different specifications and models can be
used on the same equipment.
4. Cans of 4/6/8/10/12/14/16-30 can be reheated at the same time,
each can is 500g of solder paste. If more cans are reheated, they
can be customized according to customer requirements.
5. Each bottle is equipped with a cylinder to fix the solder paste
bottle. The solder paste bottle cannot be taken out before the time
is up.
The solder paste application and requirement
When the solder paste taken out of the refrigerator before using,
the temperature of the solder paste will be much lower than the
room temperature. If open the solder paste bottle without thawing,
it’s very easy to condense the moisture in the air and adhere to
the solder paste. Also if use the solder paste without thawing,
after printing, on the reflow soldering process(temperature over
200℃), the water on the solder paste is rapidly vaporized due to
strong heat, will lead to the solder paste explosive, then will
damage the solder tin and components. So for better printing and
soldering performance. The solder paste must thaw before using.
Application:
Solder paste temperature adjustment:
Automatic solder paste thawing machine can quickly heat the solder
paste block stored at low temperature to the optimal process
temperature, usually around 20-25°C.
Precisely control the solder paste temperature to ensure that the
fluidity and viscosity of the solder paste meet the SMT process
requirements.
Efficiency improvement:
Automatic solder paste thawing machine can quickly complete the
thawing process of batch solder paste, greatly shortening the
thawing time.
Compared with manual thawing, automatic thawing machine can greatly
improve the efficiency of solder paste use and the throughput of
the production line.
Temperature monitoring:
Automatic solder paste thawing machine is usually equipped with
temperature sensors and digital temperature control systems, which
can monitor the temperature changes of solder paste in real time.
Ensure that the solder paste is used within the optimal temperature
range to avoid welding quality problems caused by too high or too
low temperature.
Environmental control:
The automatic solder paste thawing machine adopts a closed design,
which can effectively isolate the external environment and maintain
the solder paste thawing under clean and constant temperature
conditions.
Avoid the influence of factors such as dust and temperature
fluctuations during the thawing process.
Operational convenience:
Automatic solder paste thawing machines are usually equipped with a
human-machine interface, through which operators can input the
required thawing parameters.
The integrated automatic control system can realize functions such
as timing, quantitative, and automatic thawing, greatly improving
the convenience of operation.
Item | Solder Paste Thawing Machine |
Package | 1 set into one wooden carton as safety condition |
External Dimension | customizable |
Weight | about 15-20kgs |
Delivery | about 15-20 working days |
Payment | D/P, T/T, Western Union, MoneyGram |
Port | Shenzhen |
| A.By Courier: 4-7 Working days by special offer |
B.By Air: 7 Working days at appointed airport |
C.By Sea: 20-25 Working days at appointed port |
