Time Management 8 Tank Solder Paste Warm Up Machine With Touch
Screen and FIFO Function
Introduction:
Solder Paste Warm-up Timer Machine can easily achieve the control
of the solder paste temperature warm up time, which can save much
time to record the time of solder paste back to the ambient
temperature after take out off the refrigerated room. This is a
efficiency way to control the temperature of the solder paste, make
sure the activity of the solder paste, tnsure the printing quality,
better to control the production plan, improve production
efficiency.
Features:
1, Each tank of solder paste placement slot has an independent LED
display time controller. After setting the time the solder paste
will be fixed in the tank and sink automatically,also it will
release automatically when time is over.
2. With FIFO function.
3. In the case of out of power accidently,even if not reach setted
time, solder paste bottle will automatically pop up.
4. Equipped with a automatic alarm system,when reach the setting
time, this machine will automatically alarm. Also there is a
emergency stop button for emergency suitation, easy operation and
security.
5,This automatic solder paste warm up machine has 4 tanks,can warm
up 4 bottles paste at the same time,if need more tanks, can be
customized.
Specification:
| Product name | Solder paste thawing machine |
| Model | HS-SP-8N |
| Power supply | AC110V/220V, 50/60Hz |
| Air pressure | 0.4Mpa |
| Working cans | 4 tank |
| Machine dimension | 500*520*320mm |
| Weight | 30kg |
Precautions:
1. Each solder paste placement slot has independent time control.
When the time is set, the solder paste tank will automatically
sink, the solder paste will automatically sink upon completion of
heating, and it will automatically pop out after completion of
heating.
2. In the event of a power outage, if the set time is not reached,
the solder paste bottle will not be able to be removed, avoiding
the possibility of mixing up and taking it wrong.
3. Solder paste cans of different specifications and models can be
used on the same equipment
4. Multiple cans of solder paste should be reheated simultaneously,
with 500G of solder paste per can.
5. After use, turn off the power switch.
Application:
Solder paste preheating
The machine can heat refrigerated stored solder paste to the
optimal working temperature, usually between 20-30 degrees Celsius.
Preheating the solder paste can improve its fluidity and viscosity,
which is beneficial to achieving uniform and high-quality coating
during the SMT mounting process.
temperature maintenance
The Solder Paste Warm Up Machine is equipped with a temperature
control system that can continuously monitor and maintain the
optimal working temperature of the solder paste.
Ensure solder paste maintains stable process performance throughout
the entire production process.
improve product quality
Preheating and temperature control help improve solder joint
wettability and soldering strength, thereby increasing the
reliability of the final product.
Avoid welding defects caused by substandard solder paste
temperature.
Process Optimization
This equipment can provide flexible temperature settings and
control according to the welding process requirements of different
products.
It is helpful for electronic manufacturing companies to optimize
SMT welding process parameters in a targeted manner.
Improved production efficiency
Solder Paste Warm Up Machine can automatically complete the
preheating and temperature maintenance of solder paste, reducing
manual intervention.
Improved the automation level of SMT mounting process and
significantly improved production efficiency
