High Speed Pneumatic PCB Depaneling Equipment for Precise SMD PCBA
or Thin Plates
Introduction:
1. Pneumatically driven and electric control , sample design. There
have sensor device in the machine ,cuttting board one time with
lowest cut stresses.HS-310 apply for separate precise SMD PCBA or
thin plates.
2. The straight knife type separator machines were designed to
separate pre-scored panel boards carefully, without bending or
tension stress. Even sensitive SMD-components like ceramic
capacitors will not be damaged by the separate process,improve
products quality .
3. Due to the special design of the blade ,boards with high
components placed close to the edges can be separated safely. Based
on a proven method of separating, wedge-shaped knives are used to
cut the panels within the groove. This enables boards of less than
1 mm thickness to be separated safely and without cutting stress.
Features and functions
Working principle:
The Pneumatic PCB Depanelizer uses compressed air as a driving
force to split PCBA panels by cylinder or vacuum adsorption.
Compared with traditional mechanical cutting, this pneumatic
splitting method can greatly reduce the risk of damage to the PCBA
edge.
High-precision splitting:
The Pneumatic Depanelizer can accurately split along the
predetermined line of the PCBA board to ensure that the size of
each separated PCBA is consistent.
The splitting accuracy can usually reach ±0.1mm, meeting the
high-demand PCBA production needs.
Flexible adaptation:
The equipment can handle PCBA panels of various sizes and shapes
with good flexibility and adaptability.
The splitting line and force parameters can be flexibly adjusted
according to actual production needs.
Efficient production:
The Pneumatic Depanelizer has the characteristics of high
automation and simple operation.
It can greatly improve the production efficiency of PCBA splitting
and shorten the manufacturing cycle.
Low-loss design:
The pneumatic splitting method can minimize the damage and burr
problems on the PCBA edge.
It is beneficial to improve the yield rate of PCBA and the
reliability of subsequent processes.
.
Specification:
| Product name | PCB depanelizer |
| Model | HS-310L |
| Part-up height | Max 40mm |
| Part-down height | Max 20mm |
| Air supply | 5Kgf/cm |
| Output | 12.5tons(gross) |
| Efficient cutting length | 1-360mm |
| Linear blade size | 360*43.5*6mm |
| PCB thickness | 0.1mm~2.0mm(With v grove)
0.1mm ~1.0mm(Without V grove ) |
| Blade material | Import high quality high speed steel tool |
| Separating speed | 1-300mm/s |
| V-cut thickness | 0.3-3.5mm |
| Air consumption | 200-400(L/min) |
| Machine size | 700*325*400mm |
| Weight | 130kg |
| Suitable board | All V-cut boards |
Application boards:
