Tower Light Display Dual-Rail PCB Handling Equipment for Easy
Monitoring
This machine is dual rail operation, used to collect the PCBs to
the magazines.
Specification
| Model | HS-250DULD |
| PCB dimension | (50*50)~(350*250)mm |
| Magazine size | 355*320*565mm |
| PCB loading time | Around 6s |
| Magazine replace time | 30s |
| Power supply | AC100-230V,single Phase,max300A |
| Air supply | 4-6 bar, Max 10L/min |
| Transport height | 900±20mm |
| Transport direction | L to R,or R to L9(optional) |
| PCB thickness | Min 0.4mm |
| Magazine qty | top 1pc, down 1 pc, or customized |
| Step pitch options | 1-4(10mm pitch) |
| Machine dimension | 1460*1500*1200mm |
| Weight | Approx 210kg |
Features
1, True color touch screen control
2, Mitsubishi PLC
3, Magazine capacity: top 1, bottom 1, or customized
4, Selective pitch: 10mm,20mm,30mm,40mm
5, PCB transport direction: L - R, or R - L,optional
6, Manual/Automatic run mode selection
7, Front rail fixed or rear rail fixed,optional
8, Standard height for SMT application(920±20mm)
9, Tower light display
10, SMEMA signal
Work description
According to the signal recognition, automatically collect the NG
board and OK board respectively to two lifting crates; NGOK board
collector and AOI on-line, after the AOI detection judgement of
good (OK) and defective (NG) output different signals, signals sent
to the lower NGOK collector, NGOK collector to receive signals
transmitted by the AOI to make judgements, the PCB will be
automatically sorted out! OK and NG material stored in the frame;
For example: AOI output OK signal through the NGOK judgement into
the mobile push plate trolley directly into the OK lift trolley
frame; AOI output NG signal through the NGOK judgement into the
mobile trolley and transfer to the back of the NG lift trolley
frame.
Bare Board Loading
About Packaging
