High Quality Light Blink And Buzzer Warning Automatic Solder Paste
Mixer Vibration Detection
Introduction
The revolution of the centrifugal force generated by automatic
paste mixer,the force produced by the rotation of the rotating
shaft and the angle of 45 degrees.The tank is located in the upper
end of the paste continuous downward movement, at the bottom of the
pipe to the tank above the paste around the movement, the formation
of a tornado funnel type stirring action, make a smooth paste
mixing and softening, deaeration reach the proper viscosity after
mixing paste has good wettability, diffusion uniformity, excellent
printing effect, to achieve the best performance of reflow
soldering.
Functions and uses:
Stir the solder paste evenly from the barrel to avoid precipitation
and stratification
Maintain the viscosity and composition of the solder paste to
ensure the quality of printing and welding.
Main components:
Mixing barrel: used to contain and stir the solder paste
Mixing mechanism: motor-driven stirring blades, stirring in the
barrel
Control system: used to set parameters such as stirring time and
speed
Working principle:
Put the solder paste to be stirred into the mixing barrel
Set the stirring time and speed through the control system
The motor drives the stirring blades to rotate and stir the solder
paste
After stirring, the solder paste can flow evenly to meet the
requirements of subsequent printing or dispensing
Main features:
Stir evenly to prevent solder paste stratification and
deterioration
Controllable stirring time and speed to meet different process
requirements
Simple structure, easy operation, low noise
Features
1. This machine adopts FY series microcomputer control, with simple
operation and high reliability.
2. Good exterior design, beautiful, generous, and practical.
3. The stirring principle is based on the stirring method of the
motor's revolution and rotation, without the need to choose
refrigerated solder paste. Remove the deicing and quickly warm up
the solder paste, while stirring evenly before use.
4. The universal fixture holder is suitable for various brands of
500g solder paste: it can mix two cans at the same time, saving
time and improving production efficiency
5. Good fixture design ensures good mixing balance and minimal
vibration.
During the stirring process, the solder paste does not open, so
that there is no oxidation or absorption of water vapor in the
solder paste, and it has a defoaming function.
7. Closed stirring can fix the operating time, ensure the stability
of solder paste softness (Q), and mix and stir new and old solder
paste to obtain more active new solder paste.
8. Revolution speed: 1350 rpm Self rotation speed: 400 rpm. 9. This
standard machine can mix cans with a diameter of 60mm. Other sizes
of cans require customized fixtures.
Specification
| Model: | NSTAR-600 |
| Wattage: | 60W |
| Power: | AC220V, 50Hz |
| Roating speed: | Primary rotating:1400RPM;Sencond rotating:400RPM |
| Working Capacity: | 500g*2jar; |
| Tin Pot's Size: | M diameterΦ60-Φ67standard one
S diameterΦ53-Φ60(for choose, please contact us )
L diameterΦ67-Φ74(for choose, please contact us) |
| Time Setting: | 0.1～9.9mins, adjust0.1min per time;
10～30mins, adjust1.0min per time |
| Display & Caution: | LED digital display,light blink and buzzer warning |
| Machine Demension: | 410*410*490mm(W*D*H) |
| Packing Demension: | 420*420*500mm(W*D*H) |
| Net/Gross Weight: | 40KG/45KG |
