Water Based Solvent Automatic Cleaning Process SMT Stencil Cleaner
Machine
Introduction
Water based stencil cleaner is used the water based solvent as the
cleaning liquid, apply high pressure spraying cleaning and
ringsing,
also hot air drying to fulfill all the process, mainly for cleaning
stencil, plastic mesh,PCB/PCBA, squeegee etc.
Features
1. Used to clean stencils, PCBA, etc, with the water-based solvent,
adapt high pressure spray system.
2, The whole process including cleaning, ringing and drying, cleaning process: cleaning chemical isolation - rinsing (open
loop/closed loop) - drying.
3, 360 degree rotation spraying cleaning, no blind cleaning area.
4. Double liquid tank, equipped with heating system, implementation
needs cleaning-rinsing-drying.
5, Window cleaning pressure can be adjusted independently, process is
more wide, solve the SMT stencil tension in the process of high
pressure cleaning problem.
6. Liquid and the pump pressure can be displayed through the panel
pressure gauge, feedback the equipment running status in time .
7. Drift lotion resistivity monitoring, ensure the cleanliness, the
resistivity can be set up, meet the demand of different halftone
technique.
8, Touch screen panel control, usind stable and reliable imported brand color touch-screen, can
pre-setting solvent temperature, cleaning time, rinse times/time,
rinse temperature, drying time, drying temperature, electrical
conductivity monitoring parameters and so on.
9, Stepper motor control spray lance reciprocating spraying, can
choose spraying area.
10. Integral high quality stainless steel fuselage, strong and
durable, anti-acid, alkali cleaning fluid, anti-rust, etc
11. Water circulation system: Independent cleaning liquid
tank,rinsing liquid tank equipped with stainless steel precision
filter, according to need to replace filter element to ensure
cleaning performance is better.
12, Automatic drainage system, convenient management and
maintenance.
Specification
| Model | HS-610 |
| Cleaning method | Double side 360 degree high pressure spraying cleaning,ringing |
| Drying method | High pressure hot air drying |
| Application stencil size | Standard 29 inch, or customized |
| Cleaning fluid capacity | 50L*2PC(max) |
| Best liquid usage | 40L*2PCS |
| Clean and risn method | Left-right moving high pressure liquid spray cleaning |
| Drying method | High pressure hot air(Optional super models) |
| Clean time | 2-5 Min |
| Cleaning fluid separation time | 40seconds |
| Rising time | 2-5 Min |
| Rising times | 1~99times |
| Drying time | 2-5 min |
| Cleaning liquid recycling | 1μm (Micro filter::rosin, solder paste, flux and pollutants) |
| Rinse liquid emission filter | 5μm (Micro filter: rosin, solder paste, flux and pollutants) |
| Liquid heating temperature | room temp～60℃ |
| Noise | Less than 50 decibels |
| Range of resistivity tester | 0~18MΩ |
| DI water supply | 30～60L/min |
| DI water pressure | ≤0.4Mpa |
| DI water Gateway connecting pipe | 1 inch |
| Air supply | 0.45Mpa~0.7Mpa |
| Net weight | 500KG |
| Air outlet size | Φ124(W)×30mm(H) |
| Machine | 1600mm(L) ×1160mm(W) ×1850mm(H) |
