SMD Component Counter: Count Semiconductor IC, LED Chip & Diodes
with 8-104mm Carrier Tape
Introduction
The carrier tape are made of polystyrene, polycarbonate and PET.
Carrier tapes with varying conductive and anti-static qualities to
suit different components applications.The Carrier tape has pockets
that are shaped to match the contours of the component to be
carried. The width of carrier tape is between 8 and 104 mm, we also
can custom for customers based on their demand. In the carrier
tape, there are sprocket holes down both sides of the tape, round
with a radius of approximately 1.5 mm on one side and oval with a
"radius" of 0.75 mm on the other. These holes enable precision
presentation of the pocket to the pick and place unit.
Carrier tape size and it matched cover tape
Each carrier tape has it matched cover tape, the cover tape has the
cold sealing and hot sealing options during the components
packing,also the cover tape has the ESD options. Below is the
dimension of the carrier tape and it matched cover tape diagram.
| Carrier Tape(mm) | 8 | 12 | 16 | 24 | 32 | 44 | 56 | 72 | 88 | 104 |
| Cover Tape(mm) | 5.4 | 9.3 | 13.3 | 21.3 | 25.5 | 37.5 | 49.5 | 65.5 | 81.5 | 97.5 |
Reels
We also manufacture reels by injection moulding. They are made of
polystyrene in different sizes and designs. We can also produce
them in anti-static or conductive options under the requirements
Application
The embossed carrier tapes are widely used in the surface
packaging, carrying and transmission of the surface mounting
equipments,for example, the mini PCB , IC ,LED chip, connectors,
diodes, dynatrons, resistors, conductors, capacitors, fuses,
switches, relays, resonators, radome, socket component,etc.
We supply high quality embossed carrier tapes and custom carrier
tapes according to customers's demand.
If you need a carrier tape to allow parts to be placed and sealed
to go onto a pick and place system, then we have options for you.
