Max 300mm/s 4 Axis AB Glue Dispensing Machine with Stepping Motor
and Timing Belt
Introduce
The glue dispensing machine, also known as glue coating machine,
glue dripping machine, glue dispensing machine, glue filling
machine, etc., specializes in controlling fluids. The automated
machine that drips and coats the fluid on the surface of the
product or inside the product can realize three-dimensional and
four-dimensional path dispensing, precise positioning, precise glue
control, and no stringing, no glue leakage, and no glue dripping.
The dispensing machine is mainly used to accurately point, inject,
apply and drip glue, paint and other liquids in the product process
to the precise position of each product. It can be used to realize
dotting, drawing lines, circles or arcs.
working principle
1. Working principle: Compressed air is fed into the glue bottle
(syringe), and the glue is pressed into the feed pipe connected to
the piston chamber. When the piston is in the upper stroke, the
piston chamber is filled with glue. When the piston pushes
downward, the glue is dispensed. When the needle is pressed, the
glue is pressed out from the needle tip. The amount of glue dripped
out is determined by the distance of the piston's downstroke, which
can be adjusted manually or automatically controlled in the
software.
2. Features: high speed, low sensitivity to glue viscosity.
3. Advantages: It can increase the dispensing speed, improve the
dispensing environment, and improve the dispensing quality.
Features
It can replace manual work and realize mechanized production; it
can be operated by a single machine, simple, convenient, high-speed
and accurate; SD card storage method facilitates data management
and file transfer between machines; it can be equipped with a
two-component pumping system to form a two-liquid fully automatic
Dispensing machine; it can be equipped with dispensing controllers,
dispensing valves and other accessories to form a floor-standing
dispensing equipment; it can be equipped with a screw locking
mechanism and configured as an automatic screw locking machine; it
can be upgraded to an online robot as needed for various
applications Automated assembly; strong carrying capacity and large
processing space.
Machine feature
1. PC computer LCD screen operation, easy to program, easy to learn
and understand.
2. It has the functions of drawing points, lines, faces, arcs,
circles, and continually tween of irregular curves to realize any
3D non-planar track path.
3. The volume of the glue, the speed of the glue, the time of
dispensing, and the time of stopping the glue can all be
programmed.
4. With the special dispensing controller, the glue output is
stable, the glue is clean and the glue is not leaked.
5. Quickly dot, draw lines and draw circles in the inner, outer
wall, vertical surface, gap and spherical surface of the product.
6. According to the needs of customers, it can be equipped with
fixtures, glue guns, controllers, heating temperature control
devices, etc.
Application industry
Electronics, lighting, automotive, industrial electrical, solar
photovoltaic, construction engineering ect.
Specification
| ITEM | SPEC |
| Glue Mixing Ratio | 1:1-10:1/Customizable |
| Dispensing Speed | 10-150g/5s(based on 1:1 glue proportion) |
| Dispensing Precision | Glue Amount±1%, Glue Proportion±1% |
| X/Y/Z Working Range | 300*300*100mm(Z axis can be rotated) |
| XYZ Speed | Max 300mm/s |
| Drive System | Stepping Motor + Timing Belt |
| Repeatability | ±0.02mm |
| Pattern | Lines, Circles, Arcs, Continuous Paths, 3D Linear Interpolation |
| Potting Precision | Amount±1%, Ratio:±1% |
| Operation Method | Auto |
| Programming | Teach Pendant |
| Control | Board card |
| Leak-proof Function | Valve with Vacuum Device |
| Weight | 65kg |
| Dimension(L*W*H) | 716*585*645mm |
| Power Supply | 220V 50-60Hz 350W |
