PCB Lead Cutting Machine for Connecting with Automatic Soldering
Machine SMT Machine Parts
Introduction
This machine is used for cutting the extra feet/lead of PCBA after
wave soldering, the machine mainly including two parts, the PCB
fixing, and the blade fixing. The PCB is transported by the chain,
fixed by the clamper on both side, and the thimble at the buttom of
the PCB. After the blade is fixed and the height setted, the PCB
will be transported for the automatic lead cutting. The blade
rotate fast and stability,at the same time it's very low noise and
high efficiency. Warp prevention device is equipped to ensure no
damage on the PCBA boards.
Feature
1, Adopts the eagle claw type shrapnel fixture, clamping PCB board
automatic push, high stability. Plate feeding speed can be
adjusted, the spindle speed is fast, low noise, high precision,
fast efficiency.
2, A pair of conveyor chain is equipped in the model in which clamp
and deliver the PCBA to the blade turning in high speed for
trimming.
3, AC380V, 3 phase working voltage. Grouding wire equipped.
4, The machine can connect with the automatic soldering machine or AI machine.
5, High stability, it can connect with the automatic soldering
machine or AI machine.
6, With the prevent bending device, to overcome the bending PCB in
welding.
7, Input speed can be adjusted, max. speed is 3m/min.
Specification
| Model | HS-500LC |
| Power | AC220, 50/60Hz/380V,50/60Hz |
| Max. PCB size | 400mm(L) x 250mm(W) |
| Main axis speed | 4500/Min |
| Main axis motor | 3/4 Hp |
| Guide rail speed | 0-3 M can be adjustable |
| Min. lead height | 1.0-1.5mm Min |
| Machine Demension | 750*600*860mm(W*D*H) |
| Net Weight | 115KG |
Product Description
1.This machine is to cut the lead legs on the pcb board in the THT
Technologies after wave soldering or dip soldering components on
the pcb .
2.The pcb board is clamps by the fingers feeding automatically
inside the cutting machine on the stainless steel rail which
,improve the cutting stability .
3.In order to give longer lifetime of the blade, the pcb feeding
speed and cutting speed can be adjusted according to the components
leg sizes .
4.The pcb lead leg cutting machine equipped with cover safety
sensor ,when the top cover open ,the blade will stop to run ,which
can prevent accidents ,such hand injury .
About Us:
Shenzhen HanSome Technology Co.,Ltd(HSTECH)was estabilished in 2012
by prefessional and experienced engineer who wroked many years in
EMS company,we specilized in PCB handling equipments at first, then
we develop the PCB depaneling machine and SMT cleaning machine.
HSTECH not only have professional technical team for R&D,but
also have a outgoing and experienced marketing team for research
and develop, grasps products developing directions, updates the
products and technics to meet the continue changing demands. In the
past years,we have been always keep innovating and exploing to make
cost-efficient products to help our customers saving cost and
labor, improving the production efficiency at the same time.
HSTECH set the goal for "High quality and Smart”, that based on the
concept of "Quality-Oriented and Customer-orented", and combined
the industry feature, smart technology persuit for the smart
factory.As for the after-sale service, we insist on
"responsibility", we will take reaction at the first when we got
quality feedbacks,and service our customers all the time.
