High-Speed and Low-Stress PCB Depaneling Equipment HS-300 for
5-360mm Cutting Length
Introduction:
This PCB depaneling machine (HS-300) is the blade moving PCB
separator, using upper circular and down linear blade design,before
cutting, put the v-groove onto the linear blade,the upper circular
blade moving to finish spearating, the force stress is relative
low, the board don't need move will protect the components on the
board, avoid damaging.
Splitting machine, LED splitting machine, milling cutter type
splitting machine 1. Electric hybrid design, milling cutter
slitting, especially suitable for splitting precision SMD thin
plates, aluminum circuit boards 2. Guillotine type work, suitable
for PCBs of various thicknesses. The cutting stroke is less than
2mm, so there are no concerns about operational safety. 3. Reduce
the internal stress generated during cutting to less than 180μST to
avoid tin cracks and prevent damage to precision parts. 4. The edge
of the V-groove and the parts can be cut The maximum width is 0.3mm
and the height is 60mm5. The tool can be sharpened repeatedly after
wear.
PCB board depaneling machine classification:
1. Cutter-type dividing machine,
2. Stamping type dividing machine,
3. Milling cutter type dividing machine,
4. Laser dividing machine, 5. Guillotine type dividing machine.
Features:
1, This machine can use for cutting all kinds of boards with
v-slot.
2, Durable blade design, balde can be shaped at least twice.
3, Circular blade height can be adjusted to fit the different kinds
of PCB with different height components.
4, Blade moving operation,relative low force stress,single motor
control the balde, easy and conovenient operation.
5, With induction function, the machine will stop operation if the
operator touch the space of balde moving.
6, Security, with double protective device,no need worry about the
security production problem.
7, Durable, using high quality good material blade
Comparison of advantages and disadvantages
1. Knife-type depaneling machine Advantages: Low cost
Disadvantages: It can only perform linear depaneling. There are
rough edges.
2. Stamping plate splitting machine Advantages: low initial
investment cost and fast speed. Disadvantages: Since special boards
and special molds are required, the later costs are high.
Stressful.
3. Milling cutter type plate splitting machine Advantages: It can
divide plates into any shape, with very little stress and no burrs
on the cutting edge. Disadvantages: Big first cost.
4. Advantages of laser slitting machine: It also has the advantages
of milling cutter type slitting machine, and can micro-slit PCB
boards without stress. Disadvantages: The machine is expensive.
5. Guillotine-type plate splitting machine Advantages: Purely
pneumatic (commonly used air pressure in the factory), small in
size (desktop type), large in output, capable of cutting aluminum
substrates of any width and thickness, and highly cost-effective.
Specification:
| Model | HS-300 |
| Voltage | 110V/220V(optional) |
| Power | 100W |
| Efficient cutting length | 5-360mm |
| Blade size | Circular blade φ125*3mm, Linear blade 360*45*6mm |
| Blade material | Import high quality high speed steel tool |
| Separating speed | 300mm/s |
| V-cut thickness | 1/3 of the board |
| Separating width | Best 1-200mm |
| Machine size | 620*320*450mm |
| Weight | 50kg |
Detail
