V-groove PCB Separating Cutter with 400mm Length, Circular Blade
Moving
Introduction
This machine(HS-300) is the blade moving PCB separator, using upper
circular and down linear blade design,before cutting, put the
v-groove onto the linear blade,the upper circular blade moving to
finish spearating, the force stress is relative low, the board
don't need move will protect the components on the board, avoid
damaging.
Features
1, This machine can use for cutting all kinds of boards with
v-slot.
2, Durable blade design, balde can be shaped at least twice.
3, Circular blade height can be adjusted to fit the different kinds
of PCB with different height components.
4, Blade moving operation,relative low force stress,single motor
control the balde, easy and conovenient operation.
5, With induction function, the machine will stop operation if the
operator touch the space of balde moving.
6, Security, with double protective device,no need worry about the
security production problem.
7, Durable, using high quality good material blade.
Specification
| Model | HS-300 |
| Voltage | 110V/220V(optional) |
| Power | 100W |
| Efficient cutting length | 5-360mm |
| Blade size | Circular blade φ125*3mm, Linear blade 360*45*6mm |
| Blade material | Import high quality high speed steel tool |
| Separating speed | 300mm/s |
| V-cut thickness | 1/3 of the board |
| Separating width | Best 1-200mm |
| Machine size | 620*320*450mm |
| Weight | 50kg |
Advantages
1. Linking multiple pieces of the board after soldering, folding
often hurt the line or electronic parts broken, this machine to
walking knife type travelling split, can completely reduce stress,
prevent cracking of the solder joints and parts breakage, improve
production efficiency and quality.
2 . Adopting the upper circular knife under the flat knife way, the
board to the lower flat knife, switch a pedal, the upper circular
knife moving across the move to the set point, the PCB board will
be cut off and divided, cut off the non-desilk, the kerf is flat,
no burrs.
About Packaging
