Data sheet
of Pneumatic stencil cleaner HS-600.pdf...
Pneumatic SMT Stencil Cleaner HS-600 with Cleaning & Drying
Function
Machine introduction
This machine (Model:HS-600) we call it pneumatic SMT stencil
cleaning machine, it's a automatic stencil cleaning equipment, with
the cleaning and drying function combined. It's used in the SMT
assembly process, designed for automatic cleaning solder paste
steel mesh, red glue steel mesh, cooper mesh, resin screen,etc. It
use the alcohol as the cleaning solvent, equiped with the 3 level
filter system to achieve the solvent repeatly using, save the
solvent consumption. This machine use the spray cleaning method for
cleaning,powered by the air compressor, use the pump siphon the
solvent and drive the spraying cleaning bars for double sides
cleaning, the cleaning performance is very good.
Features
1.Fully automatic cleaning mode: when the equipment is in
operation, the workpiece moves in the washing basket with the
washing basket back and forth. The high-pressure jetting and
heating cleaning liquid of the spray system can make the PCBA
realize the whole process of automatic cleaning, rinsing and drying
in all directions;
2.The whole process visualization: visualization window and LED
light device, the cleaning process at a glance;
3.The most scientific nozzle design (patent): the use of up and
down dislocation, left and right gradually increasing distribution,
completely covering the cleaning blind zone. The spray arm and
nozzle are detachable;
4.Visual nozzle pressure can be adjusted: It solves the collision
and splash problem of small workpiece size under high pressure
spray condition during cleaning;
5.The photoelectric sensor switch installed in the window protects
the personal safety. The standard dilution tank/rinsing tank
heating system greatly improves the cleaning efficiency and
shortens the cleaning time;
6.The fuselage village quality: the overall 304 stainless steel
body. Acid, alkaline and other cleaning fluid;
7.Comprehensive cleaning system: compatible with running water or
chemical cleaning, for SMT; Thoroughly cleaning the surface
residual rosin, water-soluble flux, no-clean flux / solder paste
and other organic and inorganic pollutants after welding by THT
PCBA;
8.The built-in filter device for cleaning can realize the recycling
of solvent and reduce the amount of solvent;
9.There is an emergency stop button and leakage protection
function;
10.Lower operating costs: lower equipment investment costs,
localized services, teams and adequate spare parts supply.
Specification
| Model | HS-600 |
| Power supply | Compressor air |
| Application | stencil,metal mesh, steel mesh,cooper screen,gule screen |
| Stencil size | standard 29inch and below,740*740*40mm |
| Cleaning solvent | Alcohol |
| Cleaning liquid capacity | Max 45L,Min20L |
| Best cleaning fluid using volume | 40L |
| Liquid consumption | 120ml/pc |
| Cleaning method | Rotary double side pressure injection and high pressure air |
| Cleaning time | 2~4 Min Stencil and Copper Screen |
| Drying time | 2~5 Min |
| External air supply | 0.4Mpa~0.6Mpa |
| Consumer air quantity | 400~600L/Min |
| Air outlet size | φ125*25mm |
| Solder dross filter mode | 3 level filter(10um,5um,1um) |
| Weight | 305kg |
| Machine dimension | 980MM(L)*700MM(W)*1730MM(H) |
Cleaning performance
